FREE CANADA SHIPPING FOR ORDERS OVER $149

FINANCING AVAILABLE
1 4
Milwaukee  |  SKU: 2855P-22R  |  Barcode: 045242778959

Milwaukee 2855P-22R M18 FUEL 1/2 in Compact Impact Wrench w/ Pin Detent Kit

$519.00 CAD
Shipping calculated at checkout.
Earn 1 Point on this purchase. Learn more

Description

Our M18 FUEL 1/2 in Compact Impact Wrench w/ Pin Detent Kit is the most compact in its class, delivering our users more power, the most access in tight spaces at only 4.9 in in length, and maximum workspace visibility. Our cordless impact wrench features a POWERSTATE Brushless motor that generates up to 250 ft-lbs of fastening and nut-busting torque, providing our users with the power required for installation and removal, even in confined spaces. Our 1/2 in impact wrench has tri-LEDs that surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF control applies no more than 20 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. Our REDLINK PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. Our M18 REDLITHIUM XC5.0 Extended Capacity Resistant Battery Packs included provide increased protection against oils, greases, and solvents.

INCLUDES:

(1)M18 FUEL 1/2 in Compact Impact Wrench w/ Pin Detent Bare Tool(2855P-20)

(2)M18 REDLITHIUM XC5.0 Resistant Battery(48-11-1850R)

(1)M18 & M12 Multi-Voltage Charger(48-59-1812)

(1)Blow Molded Case

features:

4.9 in in length provides most access in tight spaces
The POWERSTATE brushless motor delivers up to 250 ft-lbs. of nut-busting torque
Tri-LEDs deliver high definition lighting to increase workspace visibility with less shadows
4-Mode DRIVE CONTROL provides greater control over output speed and power.
Includes auto shut-off and bolt-removal mode
AUTO SHUT-OFF control prevents over tightening and increases productivity by applying no more than 20 ft-lbs. of torque
Bolt-removal mode offers more control after bolt breakaway as RPMs drastically slow down once the bolt is loosened
Mode 1 RPMs: 0-900; Mode 2 RPMs: 0-1,650; Mode 3 RPMs: 0-2,400; Mode 4 RPMs: 0-2,400
Mode 1 IPMs: 0-1,000; Mode 2 IPMs: 0-2,400; Mode 3 IPMs: 0-3,500; Mode 4 IPMs: 0-3,500
REDLINK PLUS Intelligence ensures maximum performance and protects from overloads, heating and over-discharge

.

Specifications

Wrench TypeCompact
Anvil TypeDetent Pin
IPM3500 ipm
Maximum Torque250 ft/lbs
Fastening Torque250.0 ft/lbs
Nut-Busting Torque250 ft/lbs
Tool Warranty5 Year (Tool), 3 Years (Battery)
Power SourceCordless
Motor TypePOWERSTATE Brushless
Length4.9 in
Weight3.9 lb
Height9.93 in
Width2.56 in
Nut Busting Torque250 (ft-lbs)
BrushlessYes
Battery SystemM18
Chuck TypeNot Applicable
Chuck SizeNot Applicable
DRIVE CONTROL4-Mode w/ Auto Shut-Off Mode & Bolt Removal Mode
Maximum RPM2400 rpm
Peak Torque250 ft/lbs
Battery18 V

Milwaukee

Milwaukee 2855P-22R M18 FUEL 1/2 in Compact Impact Wrench w/ Pin Detent Kit

$519.00 CAD
Our M18 FUEL 1/2 in Compact Impact Wrench w/ Pin Detent Kit is the most compact in its class, delivering our users more power, the most access in tight spaces at only 4.9 in in length, and maximum workspace visibility. Our cordless impact wrench features a POWERSTATE Brushless motor that generates up to 250 ft-lbs of fastening and nut-busting torque, providing our users with the power required for installation and removal, even in confined spaces. Our 1/2 in impact wrench has tri-LEDs that surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF control applies no more than 20 ft-lbs of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Control delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. Our REDLINK PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. Our M18 REDLITHIUM XC5.0 Extended Capacity Resistant Battery Packs included provide increased protection against oils, greases, and solvents.
View product
Back to top